This site will look much better in a browser that supports web standards, but it is accessible to any browser or Internet device.
Clubs, glossaries, museums, shops and much more......
...all of your model making needs from one site.
This was machined from mild steel, bored and then honed with emery cloth soaked in oil. I don't have any images of it being machined and the ones I have are of it pushed into the cylinder.
The liner has a step at the top that locates in a recess in the cylinder.
The liner finishes slightly short of the bottom of the liner.
If you have made a similar engine and would like to share your experience we would love to hear from you - ed.