This site will look much better in a browser that supports web standards, but it is accessible to any browser or Internet device.
Clubs, glossaries, museums, shops and much more......
...all of your model making needs from one site.
This drill/grinder has a nice weight and feel to it. The speed range is good with enough power that you're not going to stall this easily.
The drill, impact driver and charger are all in a light plastic carry case that has metal catches and a metal plaque with Erbauer on to make it look a bit better.
Luckily the quality of the case does not reflect on the quality of the tools inside.
This is the first time I have used drill with an automatic spindle lock and wow, what a great feature. With the drill stopped you can just turn the chuck and spindle through just a few degrees before the spindle locks, allowing you to apply a high torque to the chuck to clamp the drill bit or to unlock.
This means no more running the drill against the torque you can apply by hand or trying to get a good hold on the thin ring on the back of the chuck to react the torque.
The battery pack is neat, looks like 3 off 18650 lithium ion cells in series 3 x 3.6V = 10.8V which makes perfect sense.
The 2 speed gearbox on the drill is great as this allows great control of the speed and really high torque in low - need to just have a bit more of a play and understand what they have done here to achieve this as it works very well, but the switch is so easy to engage that it makes me wonder if this is an electronic speed control rather than a physical 2 speed gearbox.
Price: Drill/Driver approx £100.00 for the complete set from Screwfix.
Both feel to be made to a very high standard with good quality materials. The drill and driver balance really well in your hand and the torque from both devices is just amazing considering 10.8V
The spindle lock is a must have feature and this works brilliantly on the drill.
A great drill and would highly recommend the set.
See also: Tools.