This site will look much better in a browser that supports web standards, but it is accessible to any browser or Internet device.

Clubs, glossaries, museums, shops and much more......

...all of your model making needs from one site.

Proxxon Drill/Grinder FBS 240/E


5,000 - 20,000rpm.
Maximum power consumption 100W, 230V.
Keyless chuck with 0.3-3.2mm capacity.
Length 185mm and mass 450g.
Insulated according to class 2 requirements.
Stable housing of POLYAMIDE with soft components in the finger grip area.


This drill/grinder has a nice weight and feel to it. The speed range is good with enough power that you're not going to stall this easily.

The flexible shaft is great. The drill has a hoop to allow it to be hung above the workbench.

I used the shaft with the sanding bobbin as shown to shape the connecting rod on my engine project. Before...


OK, with some varnish applied as well.

The drill stand is great if you need to drill lots of small (up to 3.2mm) holes, especially useful if you work on electronic boards.

Price: Drill/Grinder approx 50.00 from Axminster Tool Centre.

Price: Flexible shaft approx 32.00

Price: Drill stand approx 45.00


A great drill and would highly recommend the flexible shaft.

See also: Tools.