X

“If I Had a Hammer”

The hammer collection has definitely crept up on me... Now I've got to the point…

Nigel

Low Profile Clamp

This clamp idea came about as I wanted to machine a large plate that was…

Nigel

Prize for The Best April 2018 Article

A really small digital caliper will be the prize for the best article that is…

Nigel

Alternative Motors for the Emco Unimat 3

The Emco Unimat 3 is one of the best small lathes I have ever used.…

Nigel

Watchmakers Finger Plate

I've seen a few of these on different websites, Instagram, Pinterest and I thought I…

Nigel

Truloc 268

"Truloc Superfit 268 is a single component high viscosity anaerobic adhesive designed for high strength…

Nigel

Knurling Tool

The finished knurling tool and a piece of aluminium that has been knurled using each…

Nigel

Workshop Calculator

I often create a simple calculation on an excel spreadsheet, this allows me to check…

Nigel

Engine Bore and Stroke

The bore and stroke of the piston sets the swept volume. Swept volume[cc] = stroke[mm]…

Nigel

A4 Press

The idea was to make a hoop with a threaded bar through the middle that…

Nigel