Adiabatic Process – A process in which the system does not exchange heat with the surroundings.

Brake Thermal Efficiency – the ratio of Brake Power to Heat of Fuel for a heat engine.

Carnot Engine – An idealized reversible heat engine working in a Carnot cycle.

Carnot Limit – a theoretical limit on the efficiency of an engine based on the flow of heat between two reservoirs.

Carnot’s Theorems – no engine can be more efficient than a reversible engine working between the same limits of temperature. All reversible engines working between the same two limits of temperature have the same efficiency.

Clausius Statement – No process is possible whose sole result is the transfer of heat from a colder to a hotter body.

Cooling Fin Design – the design of the cooling fins of an air cooled engine is critical to getting the heat out of the engine cylinder and for ensuring that there are no hot spots.

First Law of Thermodynamics – simply states that energy cannot be created nor destroyed but can only be converted from one form to another.

Many equivalent statements are possible, including:

  • Internal energy changes depend only on the initial and final states of the system, not on the path taken.
  • The work done during an adiabatic process depends only on the initial and final states of the system, and not on the path taken.
  • The internal energy change for any cyclic process is zero.
  • Energy may change its form, but it cannot be created nor destroyed.
  • When work is transformed into heat, or heat into work, the quantity of work is mechanically equivalent to the quantity of heat.
  • The heat entering a system is equal to the increase in energy of the system plus the external work done by the system during the entry. ng

Otto Cycle – An idealized reversible cycle of four operations occurring in a perfect four-stroke petrol engine.

Rankine Cycle – A mathematical model that is used to predict the performance of steam engines. The Rankine cycle is an idealised thermodynamic cycle of a heat engine that converts heat into mechanical work. The heat is supplied externally to a closed loop, which usually uses water as the working fluid.

Steam – The gas phase of water.

Steam Indicator Diagram
the pressure in the cylinder is plotted versus the cylinder volume. This was developed by James Watt and John Southern to improve the efficiency of the steam engine. The work done is the area within the red curve.

Super Heated Steam – Steam heated above its saturation temperature.

Thermal Conductivity – A measure of the ability of a material to conduct heat.

Thermal Gradient – The rate at which the temperature changes with position.

Thermal Interface Material – a material used as a joint between two surfaces to improve the conduction of heat between the two. This material needs to form a good thermal interface as well as have good thermal conductivity properties itself.

Thermodynamic Equilibrium – A system is at thermodynamic equilibrium if the energy it gains from its surroundings is exactly balanced by the energy it loses, no matter how much time is allowed to pass.

Thermodynamic Free Energy – the energy in a physical system that can be converted to do work.

Vapour Pressure – the partial pressure of a gas in equilibrium with a condensed form (solid or liquid) of the same substance.

Water Cooling System – Water passes through the system or through a water cooling jack, this is then sent to a radiator where air is passed over the radiator to remove the heat from the water before it is sent back to the system to be cooled.

Working Fluid – A fluid used as the medium for the transfer of energy.

Zeroth Law of Thermodynamics – If two bodies are each in thermal equilibrium with a third body, then all three bodies are in thermal equilibrium with each other.