The Angle Plate from Warco was another buy from my trip to the Midlands Model Engineering Exhibition.
- A small cast iron angle plate.
- Nominal: 3″ x 2.5″ x 2″
- Measured: 75.4mm x 63.5mm x 50.5mm
- The slots are 8mm wide.
I just checked the accuracy of the angle with a square and there is no daylight.
Price: approx £8 for this size.
The angle plate being used along with the Stevenson blocks to support a part on my latest engine whilst I fly-cut a profile.
Good price and is as described, you cannot go wrong with this.
There are a number of different ways to hold or clamp a workpiece – see our page on workholding.