Proxxon

Proxxon DS230/e Fretsaw

by

The Proxxon DS230/e Fretsaw is a light small fretsaw that works very effectively and is easy to use at any level. Specification Machined worktable of die-cast aluminium, 160 x 160mm. ABS plastic body with side sliding panel for removal of saw dust. VDE approved 220/240V motor (85W) for prolonged, low noise performance. Quiet, wear-resistant toothed … Read more

Rotary Tool Reviews

by

If you’re about to buy your first rotary tool or replace one that has failed then check out Rotary Tools Guy There are a lot of tool manufacturers covered: Black and Decker, DeWalt, Dremel, Hitachi, Kawasaki, Milwaukee, Proxxon, SE, Wen So, check out Wade Williamson’s site and might be worth dropping him a line if … Read more

Proxxon Bench Circular Saw FKS/e

by

A review of the Proxxon Bench Circular Saw FKS/e. Specification 220 – 240V motor, 50/60Hz. Electronic speed control, with feedback effect, for speeds of 4,400 – 6,800rpm. Overall size: 300 x 262 x 170mm (without extension wing). Weight approx. 5.2kg. Table size: 295 x 240mm. Depth of cut: 1 – 22mm, uses all blades 50 … Read more

Proxxon Bench Circular Saw KS 230

by

Specification Machined, die-cast aluminium table of 160 x 160mm. Super cut blade 58mm dia., 80 teeth, individually set and sharpened, is included. Quiet, high performance 230V motor for prolonged use. Graduated mitre stop. Base of ABS with a sawdust door on the right. Adjustable fence with scale. Review I used this machine to cut up … Read more

Proxxon Cut off/mitre saw KGS 80

by

Specification 220 – 240V  200W  50/60 Hz 4,000 rpm Base with round table of highly stable, die-cast alu, with CNC milled fittings and slides. Table size 230 x 230mm. Weight 6kg. Consult the table for cutting capacities. Review Well it all started good enough, but the saw didn’t actually finish a cut before there was … Read more

Proxxon MBS 240/e Micro Bandsaw

by

The Proxxon MBS 240/e Micro Bandsaw is perfect for miniature work and has a small footprint on the workbench. You won’t be cutting through great chunks of wood with this bandsaw, but you will be doing some precision work. Specification 220 – 240V. Blade speed adjustable from 180 to 330/min. Throat 150mm, max height 85mm. … Read more